[This post was written by Martin Casado and Amar Padmanahban, with helpful input from Scott Lowe, Bruce Davie, and T. Sridhar]
This is the first in a multi-part discussion on visibility and debugging in networks that provide network virtualization, and specifically in the case where virtualization is implemented using edge overlays.
In this post, we’re primarily going to cover some background, including current challenges to visibility and debugging in virtual data centers, and how the abstractions provided by virtual networking provide a foundation for addressing them.
The macro point is that much of the difficulty in visibility and troubleshooting in today’s environments is due to the lack of consistent abstractions that both provide an aggregate view of distributed state and hide unnecessary complexity. And that network virtualization not only provides virtual abstractions that can be used to directly address many of the most pressing issues, but also provides a global view that can greatly aid in troubleshooting and debugging the physical network as well.
A Messy State of Affairs
While it’s common to blame server virtualization for complicating network visibility and troubleshooting, this isn’t entirely accurate. It is quite possible to build a static virtual datacenter and, assuming the vSwitch provides sufficient visibility and control (which they have for years), the properties are very similar to physical networks. Even if VM mobility is allowed, simple distributed switching will keep counters and ACLs consistent.
A more defensible position is that server virtualization encourages behavior that greatly complicates visibility and debugging of networks. This is primarily seen as server virtualization gives way to full datacenter virtualization and, as a result, various forms of network virtualization are creeping in. However, this is often implemented as a collection of disparate (and distributed) mechanisms, without exposing simplified, unified abstractions for monitoring and debugging. And the result of introducing a new layer of indirection without the proper abstractions is, as one would expect, chaos. Our point here is not that network virtualization creates this chaos – as we’ll show below, the reverse can be true, provided one pays attention to the creation of useful abstractions as part of the network virtualization solution.
Let’s consider some of the common visibility issues that can arise. Network virtualization is generally implemented with a tag (for segmentation) or tunneling (introducing a new address space), and this can hide traffic, confuse analysis on end-to-end reachability, and cause double counting (or undercounting) of bytes or even packets. Further, the edge understanding of the tag may change over time, and any network traces collected would therefore become stale unless also updated. Often logically grouped VMs, like those of a single application or tenant, are scattered throughout the datacenter (not necessarily on the same VLAN), and there isn’t any network-visible identifier that signifies the grouping. For example, it can be hard to say something like “mirror all traffic associated with tenant A”, or “how many bytes has tenant A sent”. Similarly, ACLs and other state affecting reachability is distributed across multiple locations (source, destination, vswitches, pswitches, etc.) and can be difficult to analyze in aggregate. Overlapping address spaces, and dynamically assigned IP addresses, preclude any simplistic IP-based monitoring schemes. And of course, dynamic provisioning, random VM placement, and VM mobility can all make matters worse.
Yes, there are solutions to many of these issues, but in aggregate, they can present a real hurdle to smooth operations, billing and troubleshooting in public and private data centers. Fortunately, it doesn’t have to be this way.
Life Becomes Easy When the Abstractions are Right
So much of computer science falls into place when the right abstractions are used. Servers provide a good example of this. Compute virtualization has been around in pieces since the introducing of the operating system. Memory, IO, and the instruction sets have long been virtualized and provide the basis of modern multi-process systems. However, until the popularization of the virtual machine abstraction, these virtualization primitives did not greatly impact the operations of servers themselves. This is because there was no inclusive abstraction that represented a full server (a basic unit of operations in an IT shop). With virtual machines, all state associated with a workload is represented holistically, allowing us to create, destroy, save, introspect, track, clone, modify, limit, etc. Visibility and monitoring in multi-user environments arguably became easier as well. Independent of which applications and operating systems are installed, it’s possible to know exactly how much memory, I/O and CPU a virtual machine is consuming, and that is generally attributed back to a user.
So is it with network virtualization – the virtual network abstraction can provide many of the same benefits as the virtual machine abstraction. However, it also provides an additional benefit that isn’t so commonly enjoyed with server virtualization: network virtualization provides an aggregated view of distributed state. With manual distributed state management being one of the most pressing operational challenges in today’s data centers, this is a significant win.
To illustrate this, we’ll provide a quick primer on network virtualization and then go through an example of visibility and debugging in a network virtualization environment.
Network Virtualization as it Pertains to Visibility and Monitoring
Network virtualization, like server virtualization, exposes a a virtual network that looks like a physical network, but has the operational model of a virtual machine. Virtual networks (if implemented completely) support L2-L7 network functions, complex virtual topologies, counters, and management interfaces. The particular implementation of network virtualization we’ll be discussing is edge overlays, in which the mechanism used to introduce the address space for the virtual domain is an L2 over L3 tunnel mesh terminated at the edge (likely the vswitch). However, the point of this particular post is not to focus on the how the network virtualization is implemented, but rather, how decoupling the logical view from the physical transport affects visibility and troubleshooting.
A virtual network (in most modern implementations, at least) is a logically centralized entity. Consequently, it can be monitored and managed much like a single physical switch. Rx/Tx counters can be monitored to determine usage. ACL counters can be read to determine if something is being dropped due to policy configuration. Mirroring of a virtual switch can siphon off traffic from an entire virtual network independent of where the VMs are or what physical network is being used in the datacenter. And of course, all of this is kept consistent independent of VM mobility or even changes to the physical network.
The introduction of a logically centralized virtual network abstraction addresses many of the problems found in todays virtualized data centers. The virtualization of counters can be used for billing and accounting without worrying about VM movements, the hiding or double counting of traffic, the distribution of VMs and network services across the datacenter. The virtualization of security configuration (e.g. ACLs) and their counters turns a messy distributed state problem into a familiar central rule set. In fact, in the next post, we’ll describe how we use this aggregate view to perform header space analysis to answer sophisticated reachability questions over state which would traditionally be littered throughout the datacenter. The virtualization of management interfaces natively provides accurate, multi-tenant support of existing tool chains (e.g. NetFlow, SNMP, sFlow, etc.), and also resolves the problem of state gathering when VMs are dispersed across a datacenter.
Impact On Workflow
However, as with virtual machines, while some level of sanity has been restored to the environment, the number of entities to monitor has increased. Instead of having to divine what is going on in a single, distributed, dynamic, complex network, there are now multiple, much simpler (relatively static) networks that must be monitored. These network are (a) the physical network, which now only needs to be concerned with packet transport (and thus has become vastly simpler) and (b) the various logical networks implemented on top of it.
In essence, visibility and trouble shooting now much take into account the new logical layer. Fortunately, because virtualization doesn’t change the basic abstractions, existing tools can be used. However, as with the introduction of any virtual layer, there will be times when the mapping of physical resources to virtual ones becomes essential.
We’ll use troubleshooting as an example. Let’s assume that VM A can’t talk to VM B. The steps one takes to determine what goes on are as follows:
- Existing tools are pointed to the effected virtual network and rx/tx counters are inspected as well as any ACLs and forwarding rules. If something in the virtual abstraction is dropping the packets (like an ACL), we know what the problem is, and we’re done.
- If it looks like nothing in the virtual space is dropping the packet, it becomes a physical network troubleshooting problem. The virtual network can now reveal the relevant physical network and paths to monitor. In fact, often this process can be fully automated (as we’ll describe in the next post). In the system we work on, for example, often you can detect which links in the physical network packets are being dropped on (or where some amount of packet loss is occurring) solely from the edge.
A number of network visibility, management, and root cause detection tools are already undergoing the changes needed to make this a one step process form the operators view. However, it is important to understand what’s going on, under the covers.
Wrapping Up for Now
This post was really aimed at teeing up the topic on visibility and debugging in a virtual network environment. In the next point, we’ll go through a specific example of an edge overlay network virtualization solution, and how it provides visibility of the virtual networks, and advanced troubleshooting of the physical network. In future posts, we’ll also cover tool chains that are already being adapted to take advantage of the visibility and troubleshooting gains possible with network virtualization.