Posted: January 13, 2015
By Justin Pettit, Ben Pfaff, Chris Wright, and Madhu Venugopal
Today we are excited to announce Open Virtual Network (OVN), a new project that brings virtual networking to the OVS user community. OVN complements the existing capabilities of OVS to add native support for virtual network abstractions, such as virtual L2 and L3 overlays and security groups. Just like OVS, our design goal is to have a production quality implementation that can operate at significant scale.
Why are we doing this? The primary goal in developing Open vSwitch has always been to provide a production-ready low-level networking component for hypervisors that could support a diverse range of network environments. As one example of the success of this approach, Open vSwitch is the most popular choice of virtual switch in OpenStack deployments. To make OVS more effective in these environments, we believe the logical next step is to augment the low-level switching capabilities with a lightweight control plane that provides native support for common virtual networking abstractions.
To achieve these goals, OVN’s design is narrowly focused on providing L2/L3 virtual networking. This distinguishes OVN from general-purpose SDN controllers or platforms.
OVN is a new project from the Open vSwitch team to support virtual network abstraction. OVN will put users in control over cloud network resources, by allowing users to connect groups of VMs or containers into private L2 and L3 networks, quickly, programmatically, and without the need to provision VLANs or other physical network resources. OVN will include logical switches and routers, security groups, and L2/L3/L4 ACLs, implemented on top of a tunnel-based (VXLAN, NVGRE, Geneve, STT, IPsec) overlay network.
OVN aims to be sufficiently robust and scalable to support large production deployments. OVN will support the same virtual machine environments as Open vSwitch, including KVM, Xen, and the emerging port to Hyper-V. Container systems such as Docker are growing in importance but pose new challenges in scale and responsiveness, so we will work with the container community to ensure quality native support. For physical-logical network integration, OVN will implement software gateways, as well as support hardware gateways from vendors that implement the “vtep” schema that ships with OVS.
Northbound, we will work with the OpenStack community to integrate OVN via a new plugin. The OVN architecture will simplify the current Open vSwitch integration within Neutron by providing a virtual networking abstraction. OVN will provide Neutron with improved dataplane performance through shortcut, distributed logical L3 processing and in-kernel based security groups, without running special OpenStack agents on hypervisors. Lastly, it will provide a scale-out and highly available gateway solution responsible for bridging from logical into physical space.
The Open vSwitch team will build and maintain OVN under the same open source license terms as Open vSwitch, and is open to contributions from all. The outline of OVN’s design is guided by our experience developing Open vSwitch, OpenStack, and Nicira/VMware’s networking solutions. We will evolve the design and implementation in the Open vSwitch mailing lists, using the same open process used for Open vSwitch.
OVN will not require a special build of OVS or OVN-specific changes to ovs-vswitchd or ovsdb-server. OVN components will be part of the Open vSwitch source and binary distributions. OVN will integrate with existing Open vSwitch components, using established protocols such as OpenFlow and OVSDB, using an OVN agent that connects to ovs-vswitchd and ovsdb-server. (The VTEP emulator already in OVS’s “vtep” directory uses a similar architecture.)
OVN is not a generic platform or SDN controller on which applications are built. Rather, OVN will be purpose built to provide virtual networking. Because OVN will use the same interfaces as any other controller, OVS will remain as flexible and unspecialized as it is today. It will still provide the same primitives that it always has and continue to be the best software switch for any controller.
The design and implementation will occur on the ovs-dev mailing list. In fact, a high-level description of the architecture was posted this morning. If you’d like to join the effort, please check out the mailing list.
Posted: July 11, 2014
[This post was co-authored by Bruce Davie and Ken Duda]
Almost a year ago, we wrote a first post about our efforts to build virtual networks that span both virtual and physical resources. As we’ve moved beyond the first proofs of concept to customer trials for our combined solution, this post serves to provide an update on where we see the interaction between virtual and physical worlds heading.
Our overall approach to connecting physical and virtual resources can be viewed in two main categories:
- terminating the overlay on physical devices, such as top-of-rack switches, routers, appliances, etc.
- managing interactions between the overlay and the physical devices that provide the underlay.
We first started working to design a control plane to terminate network virtualization overlays on physical devices in 2012. We started by looking at the information model, defining what information needed to be exchanged between a physical device and a network virtualization controller such as NSX. To bound the problem space, we focused on a specific use case: mapping the ports and VLANs of a physical switch into virtual layer 2 networks implemented as VXLAN-based overlays. (See our posts on the issues around encapsulation choice here and here). At the same time, we knew there were a lot more use cases to be addressed, so we picked a completely extensible protocol to carry the necessary information: OVSDB. This was important: we knew that over time we’d have to support a lot more use cases than just L2 bridging between physical and virtual worlds. After all, one of the tenets of network virtualization is that a virtual network should faithfully reproduce all of the networking stack, from L2-L7, just as server virtualization faithfully reproduces a complete computing environment (as described in more detail here.)
So, the first thing we added to the solution space once we got L2 working was L3. By the time we published the VTEP schema as part of Open vSwitch in late 2013, distributed logical routing was included. (We use the term VTEP – VXLAN tunnel end-point – as a general term for the devices that terminate the overlay.) Let’s take a look at how logical routing works.
Distributed logical routing is an example of a more general capability in network virtualization, the distribution of services. Brad Hedlund wrote some time ago about the value of distributing services among hypervisors. The same basic arguments apply when there are VTEPs in the picture — you want to distribute functions, like logical routing, so that packets always follow the shortest path without hair-pinning, and so that the capacity to perform that function scales out as you add more devices, be they hypervisors or physical switches.
So, suppose a VM (VM1) is placed in logical subnet A, and a physical server (PS1) that is in subnet B is located behind a ToR switch acting as a VTEP (see picture). Say we want to create a logical network that interconnects these two subnets. The logical topology is created by API requests to the network virtualization controller, which in turn programs the vswitches and the ToR to instantiate the desired topology. Part of this process entails mapping physical ports to the logical topology via API requests. Everything the ToR needs to know to participate in the logical topology is provided to it via OVSDB.
Suppose VM1 needs to send a packet to PS1. The VM will send an ARP request towards its default gateway, which is implemented in a distributed manner. (We assume the VM learned its default gateway via some prior step; for example, DHCP may be used.) The ARP request will be intercepted by the local vswitch on the hypervisor. Acting as the logical router, the vswitch will reply to the ARP, so that the VM can now send the packet towards the router. All of this happens without any packet leaving the hypervisor.
The logical router now needs to ARP for the destination — PS1 (assuming an ARP cache miss for the first packet). It will broadcast the ARP request by sending it over a VXLAN tunnel to the VTEP (and potentially to other VTEPs as well, if there are more VTEPs that are involved in logical subnet B). When the ARP packet reaches the ToR, it is sent out on one or more physical interfaces — the set of interfaces that were previously mapped to this logical subnet via API requests. The ARP will reach PS1, which replies; the ToR forwards the reply over a VXLAN tunnel to the vswitch that issued the request, and now it’s able to forward the data traffic to the ToR which decapsulates the packet and delivers it to PS1.
For traffic flowing the other way, the role of logical router would be played by the physical VTEP rather than the vswitch. This is the nature of distributed routing — there is no single box performing all the work for a single logical router, but rather a collection of devices. And in this case, the work is distributed among both hardware VTEPs and vswitches.
We’ve glossed over a couple of details here, but one detail that’s worth noting is that, for traffic heading in the physical-to-virtual direction, the hardware device needs to perform an L3 lookup followed by VXLAN encapsulation. There has been some uncertainty regarding the capabilities of various switching chips to perform this operation (see this post, for example, which tries to determine the capabilities of Trident 2 based on switch vendor information). We’ve actually connected VMware’s NSX controller to ToR switches using at least four different classes of switching silicon (two merchant vendors, two custom ASIC-based designs). This includes both Arista’s 7150 series and 7050X switches. All of these are capable of performing the necessary L3+VXLAN operations. We’ll let the switch vendors speak for themselves regarding product specifics, but we’re essentially viewing this as a non-issue.
OK, that’s L3. What next? Overall, our approach has been to try to provide the same capabilities to virtual ports and physical ports, as much as that is possible. Of course, there is some inherent conflict here: hardware-based end-points tend to excel at throughput and density, while software-based end-points give us the greatest flexibility to deliver new features. Also, given our rich partner ecosystem with many hardware players, it’s not always going to be feasible to expose the unique features of a specific hardware product through the northbound API of NSX. But we certainly see value in being able to do more on physical ports: for example, we should be able to create access control lists on physical ports under API control. Similarly, we’d like to be able to control QoS policy at the physical ingress, e.g. remarking DSCP bits or trusting the value received and copying to the outer VXLAN header. More stateful services, such as firewalling or load-balancing, may not make sense in a ToR-class device but could be implemented in specific appliances suited for those tasks, and could still be integrated into virtualized networks using the same principles that we’ve applied to L2 and L3 functions.
In summary, we see the physical edges of virtual networks as a critical part of the overall network virtualization story. And of course we consider it important that we have a range of vendors whose devices can be integrated into the virtual overlay. It’s been great to see the ecosystem develop around this ability to tie the physical and the virtual together, and we see a lot of opportunity to build on the foundation we’ve established.
Posted: November 1, 2013
[This post has been written by Martin Casado and Justin Pettit with hugely useful input from Bruce Davie, Teemu Koponen, Brad Hedlund, Scott Lowe, and T. Sridhar]
This post introduces the topic of network optimization via large flow (elephant) detection and handling. We decompose the problem into three parts, (i) why large (elephant) flows are an important consideration, (ii) smart things we can do with them in the network, and (iii) detecting elephant flows and signaling their presence. For (i), we explain the basis of elephant and mice and why this matters for traffic optimization. For (ii) we present a number of approaches for handling the elephant flows in the physical fabric, several of which we’re working on with hardware partners. These include using separate queues for elephants and mice (small flows), using a dedicated network for elephants such as an optical fast path, doing intelligent routing for elephants within the physical network, and turning elephants into mice at the edge. For (iii), we show that elephant detection can be done relatively easily in the vSwitch. In fact, Open vSwitch has supported per-flow tracking for years. We describe how it’s easy to identify elephant flows at the vSwitch and in turn provide proper signaling to the physical network using standard mechanisms. We also show that it’s quite possible to handle elephants using industry standard hardware based on chips that exist today.
Finally, we argue that it is important that this interface remain standard and decoupled from the physical network because the accuracy of elephant detection can be greatly improved through edge semantics such as application awareness and a priori knowledge of the workloads being used.
The Problem with Elephants in a Field of Mice
Conventional wisdom (somewhat substantiated by research) is that the majority of flows within the datacenter are short (mice), yet the majority of packets belong to a few long-lived flows (elephants). Mice are often associated with bursty, latency-sensitive apps whereas elephants tend to be large transfers in which throughput is far more important than latency.
Here’s why this is important. Long-lived TCP flows tend to fill network buffers end-to-end, and this introduces non-trivial queuing delay to anything that shares these buffers. In a network of elephants and mice, this means that the more latency-sensitive mice are being affected. A second-order problem is that mice are generally very bursty, so adaptive routing techniques aren’t effective with them. Therefore routing in data centers often uses stateless, hash-based multipathing such as Equal-cost multi-path routing (ECMP). Even for very bursty traffic, it has been shown that this approach is within a factor of two of optimal, independent of the traffic matrix. However, using the same approach for very few elephants can cause suboptimal network usage, like hashing several elephants on to the same link when another link is free. This is a direct consequence of the law of small numbers and the size of the elephants.
Treating Elephants Differently than Mice
Most proposals for dealing with this problem involve identifying the elephants, and handling them differently than the mice. Here are a few approaches that are either used today, or have been proposed:
- Throw mice and elephants into different queues. This doesn’t solve the problem of hashing long-lived flows to the same link, but it does alleviate the queuing impact on mice by the elephants. Fortunately, this can be done easily on standard hardware today with DSCP bits.
- Use different routing approaches for mice and elephants. Even though mice are too bursty to do something smart with, elephants are by definition longer lived and are likely far less bursty. Therefore, the physical fabric could adaptively route the elephants while still using standard hash-based multipathing for the mice.
- Turn elephants into mice. The basic idea here is to split an elephant up into a bunch of mice (for example, by using more than one ephemeral source port for the flow) and letting end-to-end mechanisms deal with possible re-ordering. This approach has the nice property that the fabric remains simple and uses a single queuing and routing mechanism for all traffic. Also, SACK in modern TCP stacks handles reordering much better than traditional stacks. One way to implement this in an overlay network is to modify the ephemeral port of the outer header to create the necessary entropy needed by the multipathing hardware.
- Send elephants along a separate physical network. This is an extreme case of 2. One method of implementing this is to have two spines in a leaf/spine architecture, and having the top-of-rack direct the flow to the appropriate spine. Often an optical switch is proposed for the spine. One method for doing this is to do a policy-based routing decision using a DSCP value that by convention denotes “elephant”.
At this point it should be clear that handling elephants requires detection of elephants. It should also be clear that we’ve danced around the question of what exactly characterizes an elephant. Working backwards from the problem of introducing queuing delays on smaller, latency-sensitive flows, it’s fair to say that an elephant has high throughput for a sustained period.
Often elephants can be determined a priori without actually trying to infer them from network effects. In a number of the networks we work with, the elephants are either related to cloning, backup, or VM migrations, all of which can be inferred from the edge or are known to the operators. vSphere, for example, knows that a flow belongs to a migration. And in Google’s published work on using OpenFlow, they had identified the flows on which they use the TE engine beforehand (reference here).
Dynamic detection is a bit trickier. Doing it from within the network is hard due to the difficulty of flow tracking in high-density switching ASICs. A number of sampling methods have been proposed, such as sampling the buffers or using sFlow. However the accuracy of such approaches hasn’t been clear due to the sampling limitations at high speeds.
On the other hand, for virtualized environments (which is a primary concern of ours given that the authors work at VMware), it is relatively simple to do flow tracking within the vSwitch. Open vSwitch, for example, has supported per-flow granularity for the past several releases now with each flow record containing the bytes and packets sent. Given a specified threshold, it is trivial for the vSwitch to mark certain flows as elephants.
The More Vantage Points, the Better
It’s important to remember that there is no reason to limit elephant detection to a single approach. If you know that a flow is large a priori, great. If you can detect elephants in the network by sampling buffers, great. If you can use the vSwitch to do per-packet flow tracking without requiring any sampling heuristics, great. In the end, if multiple methods identify it as an elephant, it’s still an elephant.
For this reason we feel that it is very important that the identification of elephants should be decoupled from the physical hardware and signaled over a standard interface. The user, the policy engine, the application, the hypervisor, a third party network monitoring system, and the physical network should all be able identify elephants.
Fortunately, this can easily be done relatively simply using standard interfaces. For example, to affect per-packet handling of elephants, marking the DSCP bits is sufficient, and the physical infrastructure can be configured to respond appropriately.
Another approach we’re exploring takes a more global view. The idea is for each vSwitch to expose its elephants along with throughput metrics and duration. With that information, an SDN controller for the virtual edge can identify the heaviest hitters network wide, and then signal them to the physical network for special handling. Currently, we’re looking at exposing this information within an OVSDB column.
Are Elephants Obfuscated by the Overlay?
No. For modern overlays, flow-level information, and QoS marking are all available in the outer header and are directly visible to the underlay physical fabric. Elephant identification can exploit this characteristic.
This is a very exciting area for us. We believe there is a lot of room to bring to bear edge understanding of workloads, and the ability for software at the edge to do sophisticated trending analysis to the problem of elephant detection and handling. It’s early days yet, but our initial forays both with customers and hardware partners, has been very encouraging.
More to come.
Posted: July 15, 2013
[This post was written by Martin Casado and Amar Padmanahban, with helpful input from Scott Lowe, Bruce Davie, and T. Sridhar]
This is the first in a multi-part discussion on visibility and debugging in networks that provide network virtualization, and specifically in the case where virtualization is implemented using edge overlays.
In this post, we’re primarily going to cover some background, including current challenges to visibility and debugging in virtual data centers, and how the abstractions provided by virtual networking provide a foundation for addressing them.
The macro point is that much of the difficulty in visibility and troubleshooting in today’s environments is due to the lack of consistent abstractions that both provide an aggregate view of distributed state and hide unnecessary complexity. And that network virtualization not only provides virtual abstractions that can be used to directly address many of the most pressing issues, but also provides a global view that can greatly aid in troubleshooting and debugging the physical network as well.
A Messy State of Affairs
While it’s common to blame server virtualization for complicating network visibility and troubleshooting, this isn’t entirely accurate. It is quite possible to build a static virtual datacenter and, assuming the vSwitch provides sufficient visibility and control (which they have for years), the properties are very similar to physical networks. Even if VM mobility is allowed, simple distributed switching will keep counters and ACLs consistent.
A more defensible position is that server virtualization encourages behavior that greatly complicates visibility and debugging of networks. This is primarily seen as server virtualization gives way to full datacenter virtualization and, as a result, various forms of network virtualization are creeping in. However, this is often implemented as a collection of disparate (and distributed) mechanisms, without exposing simplified, unified abstractions for monitoring and debugging. And the result of introducing a new layer of indirection without the proper abstractions is, as one would expect, chaos. Our point here is not that network virtualization creates this chaos – as we’ll show below, the reverse can be true, provided one pays attention to the creation of useful abstractions as part of the network virtualization solution.
Let’s consider some of the common visibility issues that can arise. Network virtualization is generally implemented with a tag (for segmentation) or tunneling (introducing a new address space), and this can hide traffic, confuse analysis on end-to-end reachability, and cause double counting (or undercounting) of bytes or even packets. Further, the edge understanding of the tag may change over time, and any network traces collected would therefore become stale unless also updated. Often logically grouped VMs, like those of a single application or tenant, are scattered throughout the datacenter (not necessarily on the same VLAN), and there isn’t any network-visible identifier that signifies the grouping. For example, it can be hard to say something like “mirror all traffic associated with tenant A”, or “how many bytes has tenant A sent”. Similarly, ACLs and other state affecting reachability is distributed across multiple locations (source, destination, vswitches, pswitches, etc.) and can be difficult to analyze in aggregate. Overlapping address spaces, and dynamically assigned IP addresses, preclude any simplistic IP-based monitoring schemes. And of course, dynamic provisioning, random VM placement, and VM mobility can all make matters worse.
Yes, there are solutions to many of these issues, but in aggregate, they can present a real hurdle to smooth operations, billing and troubleshooting in public and private data centers. Fortunately, it doesn’t have to be this way.
Life Becomes Easy When the Abstractions are Right
So much of computer science falls into place when the right abstractions are used. Servers provide a good example of this. Compute virtualization has been around in pieces since the introducing of the operating system. Memory, IO, and the instruction sets have long been virtualized and provide the basis of modern multi-process systems. However, until the popularization of the virtual machine abstraction, these virtualization primitives did not greatly impact the operations of servers themselves. This is because there was no inclusive abstraction that represented a full server (a basic unit of operations in an IT shop). With virtual machines, all state associated with a workload is represented holistically, allowing us to create, destroy, save, introspect, track, clone, modify, limit, etc. Visibility and monitoring in multi-user environments arguably became easier as well. Independent of which applications and operating systems are installed, it’s possible to know exactly how much memory, I/O and CPU a virtual machine is consuming, and that is generally attributed back to a user.
So is it with network virtualization – the virtual network abstraction can provide many of the same benefits as the virtual machine abstraction. However, it also provides an additional benefit that isn’t so commonly enjoyed with server virtualization: network virtualization provides an aggregated view of distributed state. With manual distributed state management being one of the most pressing operational challenges in today’s data centers, this is a significant win.
To illustrate this, we’ll provide a quick primer on network virtualization and then go through an example of visibility and debugging in a network virtualization environment.
Network Virtualization as it Pertains to Visibility and Monitoring
Network virtualization, like server virtualization, exposes a a virtual network that looks like a physical network, but has the operational model of a virtual machine. Virtual networks (if implemented completely) support L2-L7 network functions, complex virtual topologies, counters, and management interfaces. The particular implementation of network virtualization we’ll be discussing is edge overlays, in which the mechanism used to introduce the address space for the virtual domain is an L2 over L3 tunnel mesh terminated at the edge (likely the vswitch). However, the point of this particular post is not to focus on the how the network virtualization is implemented, but rather, how decoupling the logical view from the physical transport affects visibility and troubleshooting.
A virtual network (in most modern implementations, at least) is a logically centralized entity. Consequently, it can be monitored and managed much like a single physical switch. Rx/Tx counters can be monitored to determine usage. ACL counters can be read to determine if something is being dropped due to policy configuration. Mirroring of a virtual switch can siphon off traffic from an entire virtual network independent of where the VMs are or what physical network is being used in the datacenter. And of course, all of this is kept consistent independent of VM mobility or even changes to the physical network.
The introduction of a logically centralized virtual network abstraction addresses many of the problems found in todays virtualized data centers. The virtualization of counters can be used for billing and accounting without worrying about VM movements, the hiding or double counting of traffic, the distribution of VMs and network services across the datacenter. The virtualization of security configuration (e.g. ACLs) and their counters turns a messy distributed state problem into a familiar central rule set. In fact, in the next post, we’ll describe how we use this aggregate view to perform header space analysis to answer sophisticated reachability questions over state which would traditionally be littered throughout the datacenter. The virtualization of management interfaces natively provides accurate, multi-tenant support of existing tool chains (e.g. NetFlow, SNMP, sFlow, etc.), and also resolves the problem of state gathering when VMs are dispersed across a datacenter.
Impact On Workflow
However, as with virtual machines, while some level of sanity has been restored to the environment, the number of entities to monitor has increased. Instead of having to divine what is going on in a single, distributed, dynamic, complex network, there are now multiple, much simpler (relatively static) networks that must be monitored. These network are (a) the physical network, which now only needs to be concerned with packet transport (and thus has become vastly simpler) and (b) the various logical networks implemented on top of it.
In essence, visibility and trouble shooting now much take into account the new logical layer. Fortunately, because virtualization doesn’t change the basic abstractions, existing tools can be used. However, as with the introduction of any virtual layer, there will be times when the mapping of physical resources to virtual ones becomes essential.
We’ll use troubleshooting as an example. Let’s assume that VM A can’t talk to VM B. The steps one takes to determine what goes on are as follows:
- Existing tools are pointed to the effected virtual network and rx/tx counters are inspected as well as any ACLs and forwarding rules. If something in the virtual abstraction is dropping the packets (like an ACL), we know what the problem is, and we’re done.
- If it looks like nothing in the virtual space is dropping the packet, it becomes a physical network troubleshooting problem. The virtual network can now reveal the relevant physical network and paths to monitor. In fact, often this process can be fully automated (as we’ll describe in the next post). In the system we work on, for example, often you can detect which links in the physical network packets are being dropped on (or where some amount of packet loss is occurring) solely from the edge.
A number of network visibility, management, and root cause detection tools are already undergoing the changes needed to make this a one step process form the operators view. However, it is important to understand what’s going on, under the covers.
Wrapping Up for Now
This post was really aimed at teeing up the topic on visibility and debugging in a virtual network environment. In the next point, we’ll go through a specific example of an edge overlay network virtualization solution, and how it provides visibility of the virtual networks, and advanced troubleshooting of the physical network. In future posts, we’ll also cover tool chains that are already being adapted to take advantage of the visibility and troubleshooting gains possible with network virtualization.
Posted: May 30, 2013
[This post was put together by Teemu Koponen, Andrew Lambeth, Rajiv Ramanathan, and Martin Casado]
Scale has been an active (and often contentious) topic in the discourse around SDN (and by SDN we refer to the traditional definition) long before the term was coined. Criticism of the work that lead to SDN argued that changing the model of the control plane from anything but full distribution would lead to scalability challenges. Later arguments reasoned that SDN results in *more* scalable network designs because there is no longer the need to flood the entire network state in order to create a global view at each switch. Finally, there is the common concern that calls into question the scalability of using traditional SDN (a la OpenFlow) to control physical switches due to forwarding table limits.
However, while there has been a lot of talk, there have been relatively few real-world examples to back up the rhetoric. Most arguments appeal to reason, argue (sometimes convincingly) from first principles, or point to related but ultimately different systems.
The goal of this post is to add to the discourse by presenting some scaling data, taken over a two-year period, from a production network virtualization solution that uses an SDN approach. Up front, we don’t want to overstate the significance of this post as it only covers a tiny sliver of the design space. However, it does provide insight into a real system, and that’s always an interesting centerpiece around which to hold a conversation.
Of course, under the broadest of terms, an SDN approach can have the same scaling properties as traditional networking. For example, there is no reason that controllers can’t run traditional routing protocols between them. However, a more useful line of inquiry is around the scaling properties of a system built using an SDN approach that actually benefits from the architecture, and scaling properties of an SDN system that differs from the traditional approach. We briefly touch both of these topics in the discussion below.
The system we’ll be describing underlies the network virtualization platform described here. The core system has been in development for 4-5 years, has been in production for over 2 years, and has been deployed in many different environments.
A Scale Graph
By scale, we’re simply referring to the number of elements (nodes, links, end points, etc.) that a system can handle without negatively impacting runtime (e.g. change in the topology, controller failure, software upgrade, etc.). In the context of network virtualization, the elements under control that we focus on are virtual switches, physical ports, and virtual ports. Below is a graph of the scale numbers for virtual ports and hypervisors under control that we’ve validated over the last two years for one particular use case.
The Y axis to the left is the number of logical ports (ports on logical switches), the Y axis on the right is the number of hypervisors (and therefore virtual switches) under control. We assume that the average number of logical ports per logical switch is constant (in this case 4), although varying that is clearly another interesting metric worth tracking. Of course, these results are in no way exhaustive, as they only reflect one use case that we commonly see in the field. Different configurations will likely have different numbers.
Some additional information about the graph:
- For comparison, the physical analog of this would be 100,000 servers (end hosts), 5,000 ToR switches, 25,000 VLANs and all the fabric ports that connect these ToR switches together.
- The gains in scale from Jan 2011 to Jan 2013 were all done with by improving the scaling properties of a single node. That is, rather than adding more resources by adding controller nodes, the engineering team continued to optimize the existing implementation (data structures, algorithms, language specific overhead, etc,.). However, the controllers were being run as a cluster during that time so they were still incurring the full overhead of consensus and data replication.
- The gains shown for the last two datapoints were only from distribution (adding resources), without any changes to the core scaling properties of a single node. In this case, moving from 3 to 4 and finally 5 nodes.
Raw scaling numbers are rarely interesting as they vary by use case, and the underlying server hardware running the controllers. What we do find interesting, though, is the relative increase in performance over time. In both cases, the increase in scale grows significantly as more nodes are added to the cluster, and as the implementation is tuned and improved.
It’s also interesting to note what the scaling bottlenecks are. While most of the discussion around SDN has focused on fundamental limits of the architecture, we have not found this be a significant contributor either way. That is, at this point we’ve not run into any architectural scaling limitations; rather, what we’ve seen are implementation shortcomings (e.g. inefficient code, inefficient scheduling, bugs) and difficulty in verification of very large networks. In fact, we believe there is significant architectural headroom to continue scaling at a similar pace.
SDN vs. Traditional Protocols
One benefit of SDN that we’ve not seen widely discussed is its ability to enable rapid evolution of solutions to address network scaling issues, especially in comparison to slow-moving standards bodies and multi-year ASIC design/development cycles. This has allowed us to continually modify our system to improve scale while still providing strong consistency guarantees, which are very important for our particular application space.
It’s easy to point out examples in traditional networking where this would be beneficial but isn’t practical in short time periods. For example, consider traditional link state routing. Generally, the topology is assumed to be unknown; for every link change event, the topology database is flooded throughout the network. However, in most environments, the topology is fixed or is slow changing and easily discoverable via some other mechanism. In such environments, the static topology can be distributed to all nodes, and then during link change events only link change data needs to be passed around rather than passing around megs of link state database. Changing this behavior would likely require a change to the RFC. Changes to the RFC, though, would require common agreement amongst all parties, and traditionally results in years of work by a very political standardization process.
For our system, however, as our understanding for the problem grows we’re able to evolve not only the algorithms and data structures used, but the distribution model (which is reflected by the last two points in the graph) and the amount of shared information.
Of course, the tradeoff for this flexibility is that the protocol used between the controllers is no longer standard. Indeed, the cluster looks much more like a tightly coupled distributed software system than a loose collection of nodes. This is why standard interfaces around SDN applications are so important. For network virtualization this would be the northbound side (e.g. Quantum), the southbound side (e.g. ovsdb-conf), and federation between controller clusters.
This is only a snapshot of a very complex topic. The point of this post is not to highlight the scale of a particular system—clearly a moving target—but rather to provide some insight into the scaling properties of a real application built using an SDN approach.
Posted: October 15, 2012
[This post was written by Bruce Davie and Martin Casado.]
With the growth of interest in network virtualization, there has been a tendency to focus on the encapuslations that are required to tunnel packets across the physical infrastructure, sometimes neglecting the fact that tunneling is just one (small) part of an overall architecture for network virtualization. Since this post is going to do just that – talk about tunnel encapsulations – we want to reiterate the point that a complete network virtualization solution is about much more than a tunnel encapsulation. It entails (at least) a control plane, a management plane, and a set of new abstractions for networking, all of which aim to change the operational model of networks from the traditional, physical model. We’ve written about these aspects of network virtualization before (e.g., here).
In this post, however, we do want to talk about tunneling encapsulations, for reasons that will probably be readily apparent. There is more than one viable encapsulation in the marketplace now, and that will be the case for some time to come. Does it make any difference which one is used? In our opinion, it does, but it’s not a simple beauty contest in which one encaps will be declared the winner. We will explore some of the tradeoffs in this post.
There are three main encapsulation formats that have been proposed for network virtualization: VXLAN, NVGRE, and STT. We’ll focus on VXLAN and STT here. Not only are they the two that VMware supports (now that Nicira is part of VMware) but they also represent two quite distinct points in the design space, each of which has its merits.
One of the salient advantages of VXLAN is that it’s gained traction with a solid number of vendors in a relatively short period. There were demonstrations of several vendors’ implementations at the recent VMworld event. It fills an important market need, by providing a straightforward way to encapsulate Layer 2 payloads such that the logical semantics of a LAN can be provided among virtual machines without concern for the limitations of physical layer 2 networks. For example, a VXLAN can provide logical L2 semantics among machines spread across a large data center network, without requiring the physical network to provide arbitrarily large L2 segments.
At the risk of stating the obvious, the fact that VXLAN has been implemented by multiple vendors makes it an ideal choice for multi-vendor deployments. But we should be clear what “multi-vendor” means in this case. Network virtualization entails tunneling packets through the data center routers and switches, and those devices only forward based on the outer header of the tunnel – a plain old IP (or MAC header). So the entities that need to terminate tunnels for network virtualization are the ones that we are concerned about here.
In many virtualized data center deployments, most of the traffic flows from VM to VM (“east-west” traffic) in which case the tunnels are terminated in vswitches. It is very rare for those vswitches to be from different vendors, so in this case, one might not be so concerned about multi-vendor support for the tunnel encaps. Other issues, such as efficiency and ability to evolve quickly might be more important, as we’ll discuss below.
Of course, there are plenty of cases where traffic doesn’t just flow east-west. It might need to go out of the data center to the Internet (or some other WAN), i.e. “north-south”. It might also need to be sent to some sort of appliance such as a load balancer, firewall, intrusion detection system, etc. And there are also plenty of cases where a tunnel does need to be terminated on a switch or router, such as to connect non-virtualized workloads to the virtualized network. In all of these cases, we’re clearly likely to run into multi-vendor situations for tunnel termination. Hence the need for a common, stable, and straightfoward approach to tunneling among all those devices.
Now, getting back to server-server traffic, why wouldn’t you just use VXLAN? One clear reason is efficiency, as we’ve discussed here. Since tunneling between hypervisors is required for network virtualization, it’s essential that tunneling not impose too high an overhead in terms of CPU load and network throughput. STT was designed with those goals in mind and performs very well on those dimensions using today’s commodity NICs. Given the general lack of multi-vendor issues when tunneling between hypervisors, STT’s significant performance advantage makes it a better fit in this scenario.
The performance advantage of STT may be viewed as somewhat temporary – it’s a result of STT’s ability to leverage TCP segmentation offload (TSO) in today’s NICs. Given the rise in importance of tunneling, and the momentum behind VXLAN, it reasonable to expect that a new generation of NICs will emerge that allow other tunnel encapsulations to be used without disabling TSO. When that happens, performance differences between STT and VXLAN should (mostly) disappear, given appropriate software to leverage the new NICs.
Another factor that comes into play when tunneling traffic from server to server is that we may want to change the semantics of the encapsualution from time to time as new features and capabilities make their way into the network virtualization platform. Indeed, one of overall advantages of network virtualization is the ease with which the capabilities of the network can be upgraded over time, since they are all implemented in software that is completely independent of the underlying hardware. To make the most of this potential for new feature deployment, it’s helpful to have a tunnel encaps with fields that can be modified as required by new capabilities. An encaps that typically operates between the vswitches of a single vendor (like STT) can meet this goal, while an encaps designed to facilitate multi-vendor scenarios (like VXLAN) needs to have the meaning of every header field pretty well nailed down.
So, where does that leave us? In essence, with two good solutions for tunneling, each of which meets a subset of the total needs of the market, but which can be used side-by-side with no ill effect. Consequently, we believe that VXLAN will continue to be a good solution for the multi-vendor environments that often occur in data center deployments, while STT will, for at least a couple of years, be the best approach for hypervisor-to-hypervisor tunnels. A complete network virtualization solution will need to use both encapsulations. There’s nothing wrong with that – building tunnels of the correct encapsulation type can be handled by the controller, without the need for user involvement. And, of course, we need to remember that a complete solution is about much more than just the bits on the wire.
Posted: June 8, 2012
[This post was written with Jesse Gross, Ben Basler, Bruce Davie, and Andrew Lambeth]
Tunneling has earned a bad name over the years in networking circles.
Much of the problem is historical. When a new tunneling mode is introduced in a hardware device, it is often implemented in the slow path. And once it is pushed down to the fastpath, implementations are often encumbered by key or table limits, or sometimes throughput is halved due to additional lookups.
However, none of these problems are intrinsic to tunneling. At its most basic, a tunnel is a handful of additional bits that need to be slapped onto outgoing packets. Rarely, outside of encryption, is there significant per-packet computation required by a tunnel. The transmission delay of the tunnel header is insignificant, and the impact on throughput is – or should be – similarly minor.
In fact, our experience implementing multiple tunneling protocols within Open vSwitch is that it is possible to do tunneling in software with performance and overhead comparable to non encapsulated traffic, and to support hundreds of thousands of tunnel end points.
And that is the goal of this post: to start the discussion on the performance of tunneling in software from the network edge.
An emerging method of network virtualization is to use tunneling from the edges to decoupled the virtual network address space from the physical address space. Often the tunneling is done in software in the hypervisor. Tunneling from within the server has a number of advantages: software tunneling can easily support hundreds of thousands of tunnels, it is not sensitive to key sizes, it can support complex lookup functions and header manipulations, it simplifies the server/switch interface and reduces demands on the in-network switching ASICs, and it naturally offers software flexibility and a rapid development cycle.
An idealized forwarding path is shown in the figure below. We assume that the tunnels are terminated within the hypervisor. The hypervisor is responsible for mapping packets from VIFs to tunnels, and from tunnels to VIFs. The hypervisor is also responsible for the forwarding decision on the outer header (mapping the encapsulated packet to the next physical hop).
Some Performance Numbers for Software Tunneling
The following tests show throughput and cpu overhead for tunneling within Open vSwitch. Traffic was generated with netperf attempting to emulate a high-bandwidth TCP flow. The MTU for the VM and the physical NICs are 1500bytes and the packet payload size is 32k. The test shows results using no tunneling (OVS bridge), GRE, and STT.
The results show aggregate bidirectional throughput, meaning that 20Gbps is a 10G NIC sending and receiving at line rate. All tests where done using Ubuntu 12.04 and KVM on an Intel Xeon 2.40GHz servers interconnected with a Dell 10G switch. We use standard 10G Broadcom NICs. CPU numbers reflect the percentage of a single core used for each of the processes tracked.
The following results show the performance of a single flow between two VMs on different hypervisors. We include the Linux bridge to show that performance is comparable. Note that the CPU only includes the CPU dedicated to switching in the hypervisor and not the overhead in the guest needed to push/consume traffic.
|Throughput||Recv side cpu||Send side cpu|
|Linux Bridge:||9.3 Gbps||85%||75%|
|OVS Bridge:||9.4 Gbps||82%||70%|
This next table shows the aggregate throughput of two hypervisors with 4 VMs each. Since each side is doing both send and receive, we don’t differentiate between the two.
|OVS Bridge:||18.4 Gbps||150%|
Interpreting the Results
Clearly these results (aside from GRE, discussed below) indicate that the overhead of software for tunneling is negligible. It’s easy enough to see why that is so. Tunneling requires copying the tunnel bits onto the header, an extra lookup (at least on receive), and the transmission delay of those extra bits when placing the packet on the wire. When compared to all of the other work that needs to be done during the domain crossing between the guest and the hypervisor, the overhead really is negligible.
In fact, with the right tunneling protocol, the performance is roughly equivalent to non-tunneling, and CPU overhead can even be lower.
STT’s lower CPU usage than non-tunneled traffic is not a statistical anomaly but is actually a property of the protocol. The primary reason is that STT allows for better coalescing on the received side in the common case (since we know how many packets are outstanding). However, the point of this post is not to argue that STT is better than other tunneling protocols, just that if implemented correctly, tunneling can have comparable performance to non-tunneled traffic. We’ll address performance specific aspects of STT relative to other protocols in a future post.
The reason that GRE numbers are so low is that with the GRE outer header it is not possible to take advantage of offload features on most existing NICs (we have discussed this problem in more detail before). However, this is a shortcoming of the NIC hardware in the near term. Next generation NICs will support better tunnel offloads, and in a couple of years, we’ll start to see them show up in LOM.
In the meantime, STT should work on any standard NIC with TSO today.
The point of this post is that at the edge, in software, tunneling overhead is comparable to raw forwarding, and under some conditions it is even beneficial. For virtualized workloads, the overhead of software forwarding is in the noise when compared to all of the other machinations performed by the hypervisor.
Technologies like passthrough are unlikely to have a significant impact on throughput, but they will save CPU cycles on the server. However, that savings comes at a fairly steep cost as we have explained before, and doesn’t play out in most deployment environments.